Download Xolo X1000 Firmware

The Xolo X1000 ROM helps you downgrade or upgrade the device’s Android version, unlock the device, remove FRP protection, Fix the IMEI issue, Fix Bootloop or any Software-related problems.

1. Download and extract the Xolo X1000 Stock ROM firmware package on the computer.
2. After extracting the ROM package, you will get the original Firmware, Flash Tool, Driver, and How-to Flash Manual.
3. Install the USB driver on the computer (if in case drivers are already installed, then SKIP this step).
4. Open the SUT L3 Tool on your computer.
5. Once the tool is launched, boot your device into the download mode and connect it to the computer.
6. Now, Load the Firmware in the SUT L3 Tool.
7. Click on the flash button to begin the flashing process.
8. Once the flashing process is completed, you will be able to see Success Message at the End.
9. [NOTE] Take a Backup of everything because your data will be deleted or removed post flashing or installing the Xolo X1000 Firmware.

[*] Flash Tool: If you wish to download the latest version of SUT L3 Tool.

[*] Take a Backup: If you are going to flash or install the above Firmware on the Xolo X1000 device, then take a backup of everything because your data will be deleted or removed post flashing or installing the Firmware.

[*] We have scanned the above firmware (ROM) package against viruses/malware. You can also use other to scan your computer against viruses/malware.

Xolo Q610s

Xolo Q1000 Opus 2

Xolo Q900T

Xolo Prime

Xolo LT900

Xolo One

Xolo Play 6X-1000

Xolo Omega 5.5

Xolo Q2100

Xolo A500 Club