Download MicroMax Selfie 2 Firmware

The MicroMax Selfie 2 ROM helps you downgrade or upgrade the device’s Android version, unlock the device, remove FRP protection, Fix the IMEI issue, Fix Bootloop or any Software-related problems.

1. Download and extract the MicroMax Selfie 2 Stock ROM firmware package on the computer.
2. After extracting the ROM package, you will get the original Firmware, Flash Tool, Driver, and How-to Flash Manual.
3. Install the USB driver on the computer (if in case drivers are already installed, then SKIP this step).
4. Open the SP Flash Tool for Windows | SP Flash Tool for Linux on your computer.
5. Once the tool is launched, boot your device into the download mode and connect it to the computer.
6. Now, Load the Firmware in the SP Flash Tool for Windows | SP Flash Tool for Linux.
7. Click on the flash button to begin the flashing process.
8. Once the flashing process is completed, you will be able to see Success Message at the End.
9. [NOTE] Take a Backup of everything because your data will be deleted or removed post flashing or installing the MicroMax Selfie 2 Firmware.

[*] Flash Tool: If you wish to download the latest version of SP Flash Tool for Windows | SP Flash Tool for Linux.

[*] Take a Backup: If you are going to flash or install the above Firmware on the MicroMax Selfie 2 device, then take a backup of everything because your data will be deleted or removed post flashing or installing the Firmware.

[*] We have scanned the above firmware (ROM) package against viruses/malware. You can also use other to scan your computer against viruses/malware.

MicroMax W900

MicroMax Canvas Xpress

MicroMax X260

MicroMax X250

MicroMax X352

MicroMax Q402

MicroMax In 1

MicroMax X114

MicroMax Vdeo 3

MicroMax Canvas Xpress 2