Download Meizu MX3 Firmware

The Meizu MX3 ROM helps you downgrade or upgrade the device’s Android version, unlock the device, remove FRP protection, Fix the IMEI issue, Fix Bootloop or any Software-related problems.

1. Download and extract the Meizu MX3 Stock ROM firmware package on the computer.
2. After extracting the ROM package, you will get the original Firmware, Flash Tool, Driver, and How-to Flash Manual.
3. Install the USB driver on the computer (if in case drivers are already installed, then SKIP this step).
4. Open the Meizu Flash Tool on your computer.
5. Once the tool is launched, boot your device into the download mode and connect it to the computer.
6. Now, Load the Firmware in the Meizu Flash Tool.
7. Click on the flash button to begin the flashing process.
8. Once the flashing process is completed, you will be able to see Success Message at the End.
9. [NOTE] Take a Backup of everything because your data will be deleted or removed post flashing or installing the Meizu MX3 Firmware.

[*] Flash Tool: If you wish to download the latest version of Meizu Flash Tool.

[*] Take a Backup: If you are going to flash or install the above Firmware on the Meizu MX3 device, then take a backup of everything because your data will be deleted or removed post flashing or installing the Firmware.

[*] We have scanned the above firmware (ROM) package against viruses/malware. You can also use other to scan your computer against viruses/malware.

Meizu M6 Note

Meizu M3e

Meizu U10

Meizu M6T

Meizu 16X

Meizu M5c

Meizu MX4 Pro

Meizu Note 9

Meizu 16 Xs

Meizu 20