CUBOT Pocket 3
Announced: 2022
Download CUBOT Pocket 3 Firmware
The CUBOT Pocket 3 ROM helps you downgrade or upgrade the device’s Android version, unlock the device, remove FRP protection, Fix the IMEI issue, Fix Bootloop or any Software-related problems.
Name: Cubot Pocket 3 C033C
File Name: Cubot_Pocket_3_C033C_MT6768_V06_221017.zip
File Size: 1.98 GB
Download (4)
- Download and extract the CUBOT Pocket 3 Stock ROM firmware package on the computer.
- After extracting the ROM package, you will get the original Firmware, Flash Tool, Driver, and How-to Flash Manual.
- Install the USB driver on the computer (if in case drivers are already installed, then SKIP this step).
- Open the SP Flash Tool for Windows | SP Flash Tool for Linux on your computer.
- Once the tool is launched, boot your device into the download mode and connect it to the computer.
- Now, Load the Firmware in the SP Flash Tool for Windows | SP Flash Tool for Linux.
- Click on the flash button to begin the flashing process.
- Once the flashing process is completed, you will be able to see Success Message at the End.
- [NOTE] Take a Backup of everything because your data will be deleted or removed post flashing or installing the CUBOT Pocket 3 Firmware.
[*] Flash Tool: If you wish to download the latest version of SP Flash Tool for Windows | SP Flash Tool for Linux.
[*] Take a Backup: If you are going to flash or install the above Firmware on the CUBOT Pocket 3 device, then take a backup of everything because your data will be deleted or removed post flashing or installing the Firmware.
[*] We have scanned the above firmware (ROM) package against viruses/malware. You can also use other to scan your computer against viruses/malware.
